RUST-OLEUM HEAT RESISTANT 750°C
Rust-Oleum Heat Resistant Paint 750°C is intended for small maintenance jobs and repairs on new, bright or shot-blasted steel, or well pre-treated coated surfaces such as:
- BBQs
- Boiler fittings
- Heat and hot air cannons
- Exhausts
- Engines
- Pipes and vents
- Small maintenance repairs
Based on a silicone modified alkyd resin, Rust-Oleum Heat Resistant Paint 750°C provides protection up to a dry heat of 750°C (short-term peak load) for applications indoors or in a sheltered outdoor environment. Rust-Oleum Heat Resistant Paint 750°C is self-priming and should not be applied on primers or coatings, which are not heat resistant.
|
Product Description |
Single Pack Heat Resistant Paint for small maintenance jobs and repairs on new, bright or shot-blasted steel, or well pre-treated coated surfaces |
|
Heat Resistant |
Standard 600°C (dry heat) / Short term peak 750°C (dry heat) |
|
Application temperature |
Can be applied to steel as low as – 5 c. The steel must be at least 3 degrees above the current dew point. (see Dew point calculator on this site) |
|
Thinning |
Rust-Oleum Thinners 7301 |
|
Application |
Brush or Roller Allow the product to dry for 3 hours at room temperature and then heat to 150°C in stages of max. 50°C/hour. Allow to cool for 24 hours. The product is now fully cured. |
|
Shelf Life |
2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C. |
|
Coverage |
10-12m2 Per Ltr |
|
Drying Time |
Dry Times by 20º C/RV 50% Dry to Touch: 2 hours Dry to Handle: 8 hours Dry to Recoat: 24 hours |
|
Cleaning |
Clean Equipment or Spill with Rust-Oleum Thinners 7301 |
|
Safety |
Use in a well-ventilated atmosphere, use a respirator face mask when spraying or brushing in an enclosed space. See SDS on data sheet section. Wear suitable protective clothing, gloves and eye protection |
