INDUSTRIAL DEGREASER, CLEANER AND PRE-PAINT PREPARATION SOLUTION
SP10 is a highly effective caustic detergent that excels at removing high concentrations of grease and carbon stains. You can use it neat for intense cleaning tasks, or, alternatively, dilute it with water for less demanding jobs. SP10 includes an anti-rust additive to prevent flash rusting on clean steel surfaces.
SP10 effectively eliminates grease, dirt, and carbonized grime. For general cleaning purposes, dilute it at a 1:4 ratio—combine 1 part SP10 with 4 parts freshwater. If you’re using a power wash ratio dispenser, you can dilute it up to 1:100 by pouring neat SP10 into the detergent tank and setting the dial to 1:100.
When applying SP10 with a brush, let it foam and scrub, this foaming action helps emulsify both grease and dirt. Once cleaning is complete, rinse away all SP10 residue thoroughly with fresh water or Rustbuster Chlor-X Salt Remover.
You can use SP10 on a range of substrates, including steel, engines, farm equipment, concrete floors, tiles, plastic, and GRP. However, it is important to avoid using it on painted surfaces.
Please Note:
- Do not apply SP10 to paintwork, as it may result in caustic staining.
- Additionally, do not allow SP10 to dry on aluminium surfaces to prevent white staining.
| Product description | A yellow coloured liquid for the removal of grease. |
| Directions for use | Apply neat or diluted 1:4 by brush or spray to the surface, working into the substrate with a brush to create a foam on the surface. Leave between 5-60 minutes to allow the product to work. Wash away the SP10 with fresh water or Rustbuster Chlor-X and allow it to dry. |
| Cleaning | Brushes and equipment used can be washed clean in fresh water. |
| Safety | Wear suitable protective clothing, gloves, apron, mask, eye and face protection. |
| Material Safety Data Sheet | Click Here |
| Technical Data Sheet | Click Here |
